Standard-precision GNSS in every form factor: engine boards to solder onto your own design, modules with an antenna built in, M.2 and Mini PCIe cards for industrial computers, and finished USB receivers.
All of them track several satellite systems at once, so a fix holds up in places where GPS alone struggles. For centimeter-level work, see the RTK solutions instead.
AFC (Automatic Frequency Coordination) application · RTCM ready (v2.3 and v3.3) · 12 multi-tone AIC (active interference canceller) for removing unwanted signals.
Learn more →
Concurrent tracking of GPS, GLONASS, GALILEO, BEIDOU, QZSS, SBAS satellites · 135 channels · Allows passive antenna connection
Learn more →
Dual-band L1/L5 · Multi-constellation: GPS, GLONASS, GALILEO, BEIDOU, QZSS · Direct connection of passive antenna
Learn more →
Support NAVIC · L1 GNSS/L5 NAVIC Engine Board · Up to 10Hz update rate
Learn more →
Support both active & passive antenna · Antenna short circuit protection · High air balloon(Flies up to 99.99km)
Learn more →
Multi-constellation support: GPS, QZSS, GLONASS, BEIDOU, SBAS, Galileo ready · Low power consumption: 26mA · Antenna short circuit protection
Learn more → Recommended for drones
Dual-band L1/L5 · Compass support · UAS application
Learn more →
SMT Mountable GNSS Module · Concurrently track all Civil Navigation Systems · SLAS support in Japan
Learn more →
U-blox NEO-M9V-based · Concurrent 4 GNSS support · 50Hz Update Rate support
Learn more → Popular
FCC AFC for Wi-Fi 6E AP · RTCM ready (v2.3 and v3.3) · 12 multi-tone AIC (active interference canceller) for removing unwanted signals
Learn more →
Powered by u-blox M10 chip · Concurrent 4 GNSS support · Backup battery for faster position fix
Learn more →
135 channels · RTCM (v2.3 and v3.3) · PPS
Learn more →
Dual-band L1/L5 · All-in-one, plug-n-play module · Multi-constellation: GPS, GLONASS, GALILEO, BEIDOU, QZSSS, and NavIC
Learn more →
Support NAVIC · L1 GNSS/L5 NAVIC Smart Antenna Module · External backup power option
Learn more →
AVL/handheld applications · RTCM 2.3 support · Windows location sensor support
Learn more →
Wire-to-board connector · TTL or USB support · Up to 10Hz update rate
Learn more →
u-blox NEO-F9P-15B · With I-PEX MHF RF Connector · L1/L5 band
Learn more →
Powered by u-blox M10 chip · With I-PEX MHF RF Connector · Built-in RF connector
Learn more →
GPS, Galileo, GLONASS, BEIDOU, QZSS, SBAS Support · PCIe Mini Card standard compliant · With I-PEX MHF RF Connector
Learn more → Popular
PCIe M.2 standard compliant · With I-PEX MHF4 RF connector · Built-in RF connector
Learn more → Recommended for vehicles
U-blox NEO-M9V-based · Concurrent 4 GNSS support · 50Hz Update Rate support
Learn more →
U-blox NEO-M9V-based · 50Hz Update Rate support · MDR(UDR+ADR) support
Learn more →
FCC AFC for Wi-Fi 6E AP · RTCM ready (v2.3 and v3.3) · Based on AG3352 G3B chip
Learn more →
Powered by U-blox M10 chip · Concurrent 4 GNSS support · Tracks all L1 GNSS signals
Learn more →
135 channels, tracks all civil navigation systems · Compact with IPX7 Waterproof · 165dBm tracking sensitivity
Learn more →
Dual-band L1/L5 · Multi-constellation: GPS, GLONASS, GALILEO, BEIDOU, QZSS, and NavIC · RTCM ready (v2.3 and v3.3)
Learn more →
Support NAVIC · L1 GNSS/L5 NAVIC Smart Antenna · Up to 10Hz update rate
Learn more →
U-blox NEO-M8U-based · UDR GNSS Mouse Receiver · QZSS L1S SLAS support
Learn more →
Based on U-blox M8 single chip · High-precision PPS time service · USB/UART TTL/RS232 interface support
Learn more →
U-blox NEO-M8T based · Raw data support · GPS, GLONASS, QZSS, SBAS support
Learn more →
U-blox NEO-M8P-Based · Cm-level GNSS positioning support · Flexible fixing: built-in strong magnet or pole mounting
Learn more →
U-blox NEO-M8T-Based · High-precision timing service · Flexible fixing: built-in strong magnet or pole mounting
Learn more →
GPS Active Antenna · Low power consumption · Variable bias voltages
Learn more →
GPS Active Antenna · Low power consumption · Variable bias voltages
Learn more →
GNSS Active Antenna · Low power consumption · Variable bias voltages
Learn more →
GPS Active Antenna Module · Tiny · Low power consumption
Learn more →
GPS Patch Antenna Module · Compact · RF connector: SMB R/A PLUG
Learn more →
GPS Patch Antenna Module · Low power consumption · Variable bias voltages
Learn more →
12V/24V Step-Down Converter Cable · Input: 7~30 V · Output: 1~20 V, ~1.5A
Learn more → New
L1 GNSS smart antenna module with compass
Learn more →No products match that type. Show all products, or tell us what you need.
Products built on u-blox 7 or older engines, and on SiRF platforms. Still available to customers maintaining existing designs; new designs should use the current u-blox M10, M9 or Airoha based products above. Contact sales for a migration path.
Built-in Digital and RF connector · Screw hole for fixing · External active antenna short circuit protection
Learn more →
Application: Camera detector · GPS/QZSS ODM engine · UART interfaces
Learn more →
High precision clock application · Built-in RF connector · With I-PEX RF Connector
Learn more →
Built-in Digital and RF connector · Screw hole for fixing · External active antenna short circuit protection
Learn more →
RTCM support · High accuracy timing pulse: PPS · Support both active & passive antenna
Learn more →
High air balloon(Flies up to 99.99km) · GPS/QZSS/GLONASS/SBAS support · SiRFInstantFix™ extended ephemeris aiding
Learn more →
Dual-Antenna GNSS Module · MMCX RF connector · GPS/QZSS/GLONASS/SBAS support
Learn more →
High air balloon(Flies up to 99.99km) · Flexible support: 1PPS/PWR_CTL pin · Built-in patch antenna, power control pin, and digital connector
Learn more →
GPS clock, high air balloon applications · Built-in patch antenna, backup battery, and connector · Multi-mode AGPS support
Learn more →
RTCM 2.3 support · GPS/QZSS/GLONASS/SBAS support · Windows location sensor support
Learn more →
Up to 10Hz update rate · RTCM 2.3 support · OMA SUPL compliant A-GPS support
Learn more →
Up to 10Hz update rate · OMA SUPL compliant A-GPS support · Windows location sensor support
Learn more →
For Notebook PC, Tablet PC, Smart phone, MID, UMPC, PND and Digital camera · USB or UART interface · External active/passive antenna option
Learn more →
Built-in RF connector · External active antenna short circuit protection · Automatic switch built-in passive antenna and external active antenna
Learn more →
QZSS support to boost the GPS accuracy in Japan · Indoor/outdoor multi-path detection & compensation · High accuracy timing
Learn more →
Support multiple satellite positioning systems: GPS, GLONASS, Beidou, QZSS and SBAS · High accuracy 1PPS timing · RTCM support with 8-pin connector
Learn more →
Marine GPS plotters application · Optional data logger · High accuracy 1PPS timing
Learn more →
Low power consumption: 26 mA · Support multiple satellite positioning systems: GPS, GLONASS, Beidou, QZSS and SBAS · Mini size: 15 x15 x6.5 mm
Learn more →
SMT Mountable with built-in antenna · Marine GPS plotters application · High air balloon(Flies up to 99.99km)
Learn more →
High air balloon(Flies up to 80km) · Active Jammer Remover · Local ephemeris prediction
Learn more →
Built-in power control pin, MCX external RF connector · External backup power option available · Multi-mode AGPS support (optional)
Learn more →
Road lamp application · Built-in antenna and optional MMCX RF connector · Up to 10Hz update rate
Learn more →
For POS / MID / UMPC / Driving Recorder · Connect to main board via a 6-pin connector · OMA SUPL compliant A-GPS support
Learn more →
USB interface · Easy to use 6-pin connector · Dual-antenna support
Learn more →
PCIe Mini Card standard compliant · With I-PEX MHF RF Connector · Built-in RF connector
Learn more →
PCIe M.2 standard compliant · With I-PEX MHF4 RF connector · Built-in RF connector
Learn more →
Based on U-blox7 single chip · High-precision PPS time service · USB/UART TTL/RS232 interface support
Learn more →
High-precision clock/timing · DGPS (RTCM SC-104) · Low power: 29mA
Learn more →
High air balloon(Flies up to 99.99km) · Industrial grade GNSS receiver · Interface support: USB, RS232, TTL
Learn more →
High air balloon(Flies up to 80km) · Industrial grade GPS receiver · Interface support: USB, RS232, TTL
Learn more →
Industrial grade GPS receiver · USB connector with screws · A-GPS ready, local ephemeris prediction
Learn more →
GPS USB Dongle · Based on U-blox 7 single chip · Windows location sensor support
Learn more →
GPS USB dongle · Bluetooth/SPP · GPS data logger
Learn more →
GPS Smart Antenna Dongle · Sleek, lightweight · SBAS (WAAS and EGNOS) support
Learn more →Tell us the interface, the accuracy you need and the space you have on the board.
Contact sales Request an evaluation kit