GPS/GNSS

Positioning products in different interfaces and form factors range from GPS only, GPS+GLONASS, to GPS+GLONASS+BEIDOU+GALILEO+QZSS while bands range from L1 to L1+L2/L1+L5.

  • All
  • Engine boards
  • Modules
  • Cards
  • Mouse receivers
  • Antennas
  • Others

GE-M52

  • AFC (Automatic Frequency Coordination) application
  • RTCM ready (v2.3 and v3.3)
  • 12 multi-tone AIC (active interference canceller) for removing unwanted signals.
  • Concurrently track all civil navigation systems

GE-M121

  • Concurrent tracking of GPS, GLONASS, GALILEO, BEIDOU, QZSS, SBAS satellites
  • 135 channels
  • Allows passive antenna connection
  • 12.2 x 16 SMT mount

GE-M122

  • Dual-band L1/L5
  • Multi-constellation: GPS, GLONASS, GALILEO, BEIDOU, QZSS
  • Direct connection of passive antenna
  • PPS of ±10ns accuracy

GE-M123

  • Support NAVIC
  • L1 GNSS/L5 NAVIC Engine Board
  • Up to 10Hz update rate
  • RTCM ready (v2.3 and v3.3)
  • PPS of ±10ns accuracy

GE-A103

  • Support both active & passive antenna
  • Antenna short circuit protection
  • High air balloon(Flies up to 99.99km)
  • Fully EMI shielded
  • Mini size: 9.7 x 10.1 x 2.0 mm

GE-A12

  • Multi-constellation support: GPS, QZSS, GLONASS, BEIDOU, SBAS, Galileo ready
  • Low power consumption: 26mA
  • Antenna short circuit protection
  • Built-in flash for firmware upgrade

GE-708

  • Built-in Digital and RF connector
  • Screw hole for fixing
  • External active antenna short circuit protection
  • GNSS support

GE-710

  • Application: Camera detector
  • GPS/QZSS ODM engine
  • UART interfaces
  • OMA SUPL compliant A-GPS support
  • Tiny size: 10 x 12 x 2.4 mm

GE-612

  • High precision clock application
  • Built-in RF connector
  • With I-PEX RF Connector
  • Easy power saving contro
  • Size: 10 x 12 x 3.5 mm

GE-5083

  • Built-in Digital and RF connector
  • Screw hole for fixing
  • External active antenna short circuit protection
  • Multi-satellite positioning systems support

GE-5103

  • RTCM support
  • High accuracy timing pulse: PPS
  • Support both active & passive antenna
  • GPS/QZSS/GLONASS/SBAS support
  • Low power: 22mA at continuous tracking

GM-M70

  • SMT Mountable GNSS Module
  • Concurrently track all Civil Navigation Systems
  • SLAS support in Japan
  • Smart jammer detection and suppression

GM-8018

  • U-blox NEO-M9V-based
  • Concurrent 4 GNSS support
  • 50Hz Update Rate support
  • QZSS L1S SLAS support
  • Spoofing detection and reporting

GM-M52

  • FCC AFC for Wi-Fi 6E AP
  • RTCM ready (v2.3 and v3.3)
  • 12 multi-tone AIC (active interference canceller) for removing unwanted signals
  • Concurrently track all civil navigation systems

GM-U01

  • Powered by u-blox M10 chip
  • Concurrent 4 GNSS support
  • Backup battery for faster position fix
  • External backup power option via I/O
  • LED for position fix indication
  • FCC AFC for Wi-Fi 6E AP

GM-M01

  • 135 channels
  • RTCM (v2.3 and v3.3)
  • PPS
  • All-in-one smart antenna module
  • Indoor and outdoor multi-path detection and compensation

GM-M02

  • Dual-band L1/L5
  • All-in-one, plug-n-play module
  • Multi-constellation: GPS, GLONASS, GALILEO, BEIDOU, QZSSS, and NavIC
  • RTCM ready (v2.3 and v3.3)
  • PPS of ±10ns accuracy

GM-M03

  • Support NAVIC
  • L1 GNSS/L5 NAVIC Smart Antenna Module
  • External backup power option
  • RTCM ready (v2.3 and v3.3)
  • PPS of ±10ns accuracy

GM-A013

  • High air balloon(Flies up to 99.99km)
  • GPS/QZSS/GLONASS/SBAS support
  • SiRFInstantFix™ extended ephemeris aiding
  • Fully EMI shielded

GM-A023

  • Dual-Antenna GNSS Module
  • MMCX RF connector
  • GPS/QZSS/GLONASS/SBAS support
  • SiRFInstantFix™ extended ephemeris aiding

GM-A203

  • High air balloon(Flies up to 99.99km)
  • Flexible support: 1PPS/PWR_CTL pin
  • Built-in patch antenna, power control pin, and digital connector
  • GPS/QZSS/GLONASS/SBAS support

GM-801

  • AVL/handheld applications
  • RTCM 2.3 support
  • Windows location sensor support
  • Linux/Android support
  • Higher update rate option,up to 18Hz

GM-820

  • Wire-to-board connector
  • TTL or USB support
  • Up to 10Hz update rate
  • OMA SUPL compliant A-GPS support
  • Multi-satellite positioning systems support

GM-420

  • GPS clock, high air balloon applications
  • Built-in patch antenna, backup battery, and connector
  • Multi-mode AGPS support
  • ocal ephemeris prediction

GM-701

  • RTCM 2.3 support
  • GPS/QZSS/GLONASS/SBAS support
  • Windows location sensor support
  • Linux/Android support
  • A-GPS support

GM-720

  • Up to 10Hz update rate
  • RTCM 2.3 support
  • OMA SUPL compliant A-GPS support
  • Windows location sensor support
  • Size: 20 x 20 x 6.5 mm

GM-721

  • Up to 10Hz update rate
  • OMA SUPL compliant A-GPS support
  • Windows location sensor support
  • Excellent EMI protection
  • Size: 20.1 x 20.1 x 8.2 mm

GM-735

  • For Notebook PC, Tablet PC, Smart phone, MID, UMPC, PND and Digital camera
  • USB or UART interface
  • External active/passive antenna option
  • Size: 35 x 8 x 6.5 mm

GM-739

  • Built-in RF connector
  • External active antenna short circuit protection
  • Automatic switch built-in passive antenna and external active antenna

GM-5019

  • QZSS support to boost the GPS accuracy in Japan
  • Indoor/outdoor multi-path detection & compensation
  • High accuracy timing

GN-5013

  • Support multiple satellite positioning systems: GPS, GLONASS, Beidou, QZSS and SBAS
  • High accuracy 1PPS timing
  • RTCM support with 8-pin connector

GN-5203

  • Marine GPS plotters application
  • Optional data logger
  • High accuracy 1PPS timing
  • Up to 3-day self-generated orbit predictions

GM-5153

  • Low power consumption: 26 mA
  • Support multiple satellite positioning systems: GPS, GLONASS, Beidou, QZSS and SBAS
  • Mini size: 15 x15 x6.5 mm

GM-A703

  • SMT Mountable with built-in antenna
  • Marine GPS plotters application
  • High air balloon(Flies up to 99.99km)
  • High accuracy 1PPS timing
  • GPS/QZSS/GLONASS/SBAS support

GM-401

  • High air balloon(Flies up to 80km)
  • Active Jammer Remover
  • Local ephemeris prediction
  • GPS/QZSS/SBAS support
  • Multi-mode AGPS support(optional)

GM-428

  • Built-in power control pin, MCX external RF connector
  • External backup power option available
  • Multi-mode AGPS support (optional)
  • Size: 24 x 28 x 7 mm

GM-713

  • Road lamp application
  • Built-in antenna and optional MMCX RF connector
  • Up to 10Hz update rate
  • Size: 13.3 x 30.3 x 6.5 mm

GM-717

  • For POS / MID / UMPC / Driving Recorder
  • Connect to main board via a 6-pin connector
  • OMA SUPL compliant A-GPS support
  • Size: 17 x 17 x 6.5 mm

GM-242

  • USB interface
  • Easy to use 6-pin connector
  • Dual-antenna support
  • Module ON/OFF control for power saving
  • Slim Size: 42 x 8 x 6.5 mm

GE-726

  • PCIe Mini Card standard compliant
  • With I-PEX MHF RF Connector
  • Built-in RF connector
  • Support USB or UART/TTL interface
  • External active antenna short circuit protection

GE-826

  • GPS, Galileo, GLONASS, BEIDOU, QZSS, SBAS Support
  • PCIe Mini Card standard compliant
  • With I-PEX MHF RF Connector
  • Built-in RF connector
  • Support USB or UART/TTL interface

GE-730

  • PCIe M.2 standard compliant
  • With I-PEX MHF4 RF connector
  • Built-in RF connector
  • Up to 10Hz update rate
  • GPS, QZSS, GLONASS, SBAS support

GE-830

  • PCIe M.2 standard compliant
  • With I-PEX MHF4 RF connector
  • Built-in RF connector
  • Up to 10Hz update rate
  • GPS, GLONASS, BEIDOU, QZSS, SBAS support

GR-8018

  • U-blox NEO-M9V-based
  • Concurrent 4 GNSS support
  • 50Hz Update Rate support
  • UDR support
  • QZSS L1S SLAS support
  • Spoofing detection and reporting

GR-950

  • U-blox NEO-M9V-based
  • 50Hz Update Rate support
  • MDR(UDR+ADR) support
  • 12VDC/24VDC power source-compliant
  • Support of ADR signals from vehicle directly

GR-M52

  • FCC AFC for Wi-Fi 6E AP
  • RTCM ready (v2.3 and v3.3)
  • Based on AG3352 G3B chip
  • Speeding (trace analysis)
  • Concurrently track L1 signals from all civil navigation systems

GR-U01

  • Powered by U-blox M10 chip
  • Concurrent 4 GNSS support
  • Tracks all L1 GNSS signals
  • Low power: 16mA at continuous tracking
  • Compatible with GPSD PPS support
  • FCC AFC for Wi-Fi 6E AP

GR-M01

  • 135 channels, tracks all civil navigation systems
  • Compact with IPX7 Waterproof
  • 165dBm tracking sensitivity
  • RTCM (v2.3 and v3.3)
  • PPS of ±10ns accuracy

GR-M02

  • Dual-band L1/L5
  • Multi-constellation: GPS, GLONASS, GALILEO, BEIDOU, QZSS, and NavIC
  • RTCM ready (v2.3 and v3.3)
  • PPS of ±10ns accuracy

GR-M03

  • Support NAVIC
  • L1 GNSS/L5 NAVIC Smart Antenna
  • Up to 10Hz update rate
  • RTCM ready (v2.3 and v3.3)
  • PPS of ±10ns accuracy

GR-8017

  • U-blox NEO-M8U-based
  • UDR GNSS Mouse Receiver
  • QZSS L1S SLAS support
  • IMES(Indoor Messaging System) support
  • GPS/Galileo/QZSS/GLONASS/SBAS support

GR-701

  • Based on U-blox7 single chip
  • High-precision PPS time service
  • USB/UART TTL/RS232 interface support
  • IPX7 Waterproof
  • Up to 10Hz update rate

GR-801

  • Based on U-blox M8 single chip
  • High-precision PPS time service
  • USB/UART TTL/RS232 interface support
  • IPX7 Waterproof
  • Up to 18Hz update rate

GR-8015

  • U-blox NEO-M8T based
  • Raw data support
  • GPS, GLONASS, QZSS, SBAS support
  • Interface support: USB, RS232, TTL
  • RTCM 2.3 support

GR-5013

  • High-precision clock/timing
  • DGPS (RTCM SC-104)
  • Low power: 29mA
  • Up to 10Hz update rate
  • GPS, GLONASS, QZSS, SBAS support

GR-A013

  • High air balloon(Flies up to 99.99km)
  • Industrial grade GNSS receiver
  • Interface support: USB, RS232, TTL
  • Connector: PS2, RJ45, DB9, USB etc
  • IPX7 Waterproof

GR-401

  • High air balloon(Flies up to 80km)
  • Industrial grade GPS receiver
  • Interface support: USB, RS232, TTL
  • Connector: PS2, RJ45, DB9, USB etc
  • IPX7 Waterproof

GR-401W

  • Industrial grade GPS receiver
  • USB connector with screws
  • A-GPS ready, local ephemeris prediction
  • Backup battery support for faster position fix

GR-8030

  • U-blox NEO-M8P-Based
  • Cm-level GNSS positioning support
  • Flexible fixing: built-in strong magnet or pole mounting
  • Integrated RTK base
  • RTK rover receiver

GR-8031

  • U-blox NEO-M8T-Based
  • High-precision timing service
  • Flexible fixing: built-in strong magnet or pole mounting
  • Precise positioning capability via raw data

GA-0040

  • GPS Active Antenna
  • Low power consumption
  • Variable bias voltages
  • High gain, low noise
  • Water-resistance
  • Size: 42 x 36 x 15 mm

GA-005

  • GPS Active Antenna
  • Low power consumption
  • Variable bias voltages
  • High gain, low noise
  • Water-resistance
  • Size: 48.6 x 39.2 x 15.2 mm

GA-211

  • GNSS Active Antenna
  • Low power consumption
  • Variable bias voltages
  • High gain, low noise
  • Water-resistance
  • Size: 40 x 48 x 13 mm

GA-105D

  • GPS Active Antenna Module
  • Tiny
  • Low power consumption
  • Variable bias voltages
  • High gain, low noise
  • Size: 13 x 13 x 6 mm

GA-105P

  • GPS Patch Antenna Module
  • Compact
  • RF connector: SMB R/A PLUG
  • Cable Type RG174 cable
  • Size: 28 x 29 x 6 mm

GA-106C

  • GPS Patch Antenna Module
  • Low power consumption
  • Variable bias voltages
  • High gain, low noise
  • Size: 15 x 15 x 6.6 mm

GR-700

  • GPS USB Dongle
  • Based on U-blox 7 single chip
  • Windows location sensor support
  • Supports all major operating systems (Windows, Linux, Android, MAC OS etc.)

GR-312

  • GPS USB dongle
  • Bluetooth/SPP
  • GPS data logger
  • Photo tagging
  • Google Earth enabled passive tracking

GR-300

  • GPS Smart Antenna Dongle
  • Sleek, lightweight
  • SBAS (WAAS and EGNOS) support
  • Cute design for bringing as necklace or key chain

BA-3XX

  • 12V/24V Step-Down Converter Cable
  • Input: 7~30 V
  • Output: 1~20 V, ~1.5A
  • IP66
  • Networking systems application